experiment-analysis

Replay-driven post-mortem skill for finished Orbit Wars experiments. Selects the analysis target by priority (most recent iter only / last N iters / inconclusive only / specific iter), honors the case

SKILL.md

GitHub

Experiment Analysis Skill (Orbit Wars)

Replay-driven post-mortem. Honors the hypotheses.md skip list, selects the analysis target by priority, converts replays to Markdown via a Python script, has Claude analyze, summarizes + suggests NEXT ACTION, and finally writes back the verdict for the analyzed iter to hypotheses.md. Raw replay JSON never enters Claude's context (the script does the Markdown conversion).

Out of scope: deciding what the next iteration should be (deepen / broaden / list-consume). That decision lives in experiment-plan Step 0.5, which reads this skill's verdict + the recent Iteration log to choose. The NEXT ACTION report from this skill is informational guidance, not a state mutation.

Skill flow

6 phases. Phase 1.5 (target prioritization) and Phase 4.5 (hypotheses.md write-back) are new. A skip-mode bypass for replay analysis is included.

Phase 1 — Identify the target case and hypotheses.md

AskUserQuestion, 1 question to confirm the target case (imitation/case1 / rulebase/case4 / Other free-text). Skip when obvious from recent conversation.

After confirmation:

  • Search and read docs/experiment/<family>/{yyyymmdd}_case{N}_{topic}/hypotheses.md.
  • Cache the skip list / primary metric / Iteration log in memory.
  • If replay 分析を行わない is in the skip list, run Phase 2 in skip mode (no replay-Markdown conversion; analysis uses iter*_result.md and training logs only).

If hypotheses.md does not exist (legacy directories), fall back to the original mode (no skip-list awareness).

Phase 1.5 — Prioritize the analysis target (new)

AskUserQuestion, 1 question:

Q options
分析対象の選び方 直前 iter のみ ⭐推薦 / 直近 3 iter 全部 (横断比較) / 直近 5 iter 全部 / 採否 inconclusive の iter のみ / 特定 iter を指定 (Other で iter 番号) / Other

Read the iterN_result.md (or result.md) of the selected iter group. They serve as input to replay selection (which iter's matches we pick).

When multiple iters are involved, do not run Phases 2–3 once per iter. Instead, pick two representative replays (e.g. one win + one loss from the most recent inconclusive iter) and do a single Markdown conversion. Markdown conversion is the dominant context cost, so never exceed n = 2.

Phase 2 — Pick two replays (skippable)

If replay 分析を行わない is set, skip Phase 2 and go to Phase 3 (analyze iter*_result.md / training logs only).

Otherwise:

AskUserQuestion, 1 question (population = the iter group from Phase 1.5):

Q options
選定戦略 長戦 (拮抗・終局直前) + 最速敗北 (構造的弱点) (推薦・両極から学べる) / win 1 + loss 1 / loss × 2 / win × 2 / seed 直接指定 / Other

Why "long match + fastest loss" is the default:

  • Long match = total_turns ≥ p75 of the population. Useful for studying mid-game tactics and end-game closure.
  • Fastest loss = total_turns ≤ p25 of the population AND self_reward = -1. Reveals structural early-game weaknesses (failed initial neutral capture, early home loss, opening ship-spread mistakes).
  • Picking two extreme turn-lengths often gives a stronger diagnostic signal than win + loss.

Selection implementation:

  • Read data/lake/selfplay/matches/index.parquet with polars; filter by winner / agents / total_turns.
  • "Long" = latest match where total_turns >= quantile(0.75).
  • "Fastest loss" = latest match where total_turns <= quantile(0.25) AND self_reward == -1.
  • If index.parquet is missing or has no total_turns column, run pick_match_pair.py (see scripts section) to compute it from raw replays.
  • Worktree data/ is a symlink; the actual replays live under /Users/user/project/orbit-wars/data/.... Pass absolute paths to the script.

Phase 3 — Markdown conversion via Python script

Run replay_to_markdown.py against the two selected replays to produce result_1.md / result_2.md. stdout is exactly two lines (wrote ... (N lines)). Do not paste raw JSON or per-turn tables into Claude's chat.

Output directory:

data/output/experiment/{family}/case{N}/replay_analysis/{yyyymmdd_HHMM}/result_{1,2}.md

(Under data/output/, not docs/experiment/. Reference paths from hypotheses.md / iterN_analysis.md.)

Phase 4 — Read the Markdown and analyze

Claude Reads result_1.md / result_2.md (in skip mode, only iter*_result.md) and must cover three views:

  1. why_lost — pinpoint decisive turns / events from Turning points / Key events of the loss match. Up to 3 candidate hypotheses, each backed by supporting/refuting turn-level facts.
  2. what_worked — behaviors that functioned in the win match (or in the early phase of the loss match). Patterns worth reproducing.
  3. where_to_focus_next — turn ranges and metrics to drill into next. e.g. "turn 50–80 around the comet appearance" or "turn 150 in-flight ratio during the all-out battle".

n = 2 is for hypothesis generation, not conclusion. If n<300 で結論を出さない is in the skip list, always frame findings as "what would it take to confirm this in N more matches?" rather than declarative claims.

Phase 4.5 — Adoption write-back to hypotheses.md

Run only when hypotheses.md exists. Read → edit → write back. Only the verdict for the analyzed iter is written. The next-iteration decision (deepen / broaden / list-consume) is made by experiment-plan Step 0.5 when it reads this file later — do not touch 状態: or append new hypothesis rows here.

What to write back:

  1. Hypothesis checkbox update — change the - [ ] of the hypothesis tied to the analyzed iter (e.g. H3) to - [x] and append an adoption note inline:
    - [x] (P1) H3: focal α 0.25→0.75 — adopted (iter9: 5/100 vs baseline_v5, inconclusive @300)
    
  2. Update / replace the iter's row in the Iteration log table — iter / start time / hypothesis# / plan path / run_id / primary metric / verdict / result path / analysis path. (experiment-execution Phase 8 already added a provisional row marked (analysis 未実施); replace that row with the final verdict + analysis path.)
  3. Update last-updated date (最終更新) to session currentDate.

Out of scope for this skill (handled by experiment-plan Step 0.5 instead):

  • ❌ Do not rewrite 状態: (no auto paused here).
  • ❌ Do not append - [ ] (auto, deep) ... follow-up hypotheses.
  • ❌ Do not count consecutive rejections to trigger broaden.

The replay-derived where_to_focus_next and follow-up-suggestion content goes into the iter*_analysis.md write-up and Phase 6's NEXT ACTION report — experiment-plan reads those when deciding the next iter's mode.

When hypotheses.md does not exist, skip Phase 4.5 entirely.

Phase 5 — Summary report

Structured Japanese report to the user (always include the paths to result_1.md / result_2.md):

  • 2-match headline comparison (omit in skip mode): planets / ships / production / total_turns delta table
  • why_lost: decisive turn + 3–5 key events + up to 3 candidate hypotheses with supporting/refuting evidence
  • what_worked: 2–3 behaviors that worked, with turn numbers
  • where_to_focus_next: turn ranges + metrics to watch
  • hypotheses.md updates: verdict written for the analyzed iter (checkbox + Iteration log row), in 1 line. Next-iter decision is left to experiment-plan.

Phase 6 — NEXT ACTION suggestions

Suggest 2–3 concrete follow-ups, e.g.:

  • "seed×10 で同一傾向か再評価" (increase n or re-run the same case)
  • "turn N–M の action 分布を抽出して passive gating 検証"
  • "次 iter で <仮説に基づく修正> を実装" (→ /experiment-plan will pick the mode and may auto-append a deepen hypothesis)
  • "replay-viewer で seed=X を目視確認" (→ /replay-viewer)
  • "ジャンル全体の筋を見直したい" (→ /experiment-plan will detect broaden and recommend /experiment-hypothesize)

Do not auto-spawn other skills. Suggest by name only.

Python scripts: usage and spec

Layout

  • .claude/skills/experiment-analysis/scripts/replay_to_markdown.py — converts two replays to Markdown (Phase 3)
  • .claude/skills/experiment-analysis/scripts/pick_match_pair.py — auto-picks "long match + fastest loss" from the population (default Phase 2 strategy)

Phase 2 helper: pick_match_pair.py

python3 .claude/skills/experiment-analysis/scripts/pick_match_pair.py \
  --replays-dir /Users/user/project/orbit-wars/data/lake/selfplay/matches/replays \
  --self-player-id 1 \
  --limit 200

stdout is exactly two lines (long\t<abs_path> / fastest_loss\t<abs_path>). Claude parses these and feeds them into replay_to_markdown.py.

arg default description
--replays-dir (required) directory containing *.json.gz; symlinks OK
--self-player-id 1 own player ID
--limit 200 scan only the latest N files
--long-quantile 0.75 upper quartile threshold for total_turns
--fast-quantile 0.25 lower quartile threshold for total_turns

Phase 3 main: replay_to_markdown.py

python3 .claude/skills/experiment-analysis/scripts/replay_to_markdown.py \
  --replay <ABS_PATH_A.json.gz> --replay <ABS_PATH_B.json.gz> \
  --label win --label loss \
  --out-dir data/output/experiment/{family}/case{N}/replay_analysis/<id>/

No uv needed (stdlib only). Always pass absolute paths when running from a worktree.

arg required default description
--replay PATH yes (×2) — absolute path to .json.gz
--label LABEL yes (×2) — win / loss / seed42 etc.
--out-dir DIR yes — output directory
--player-id INT no inferred from label viewpoint player ID
--ship-loss-abs INT no 20 absolute threshold for ship-loss-burst detection
--ship-loss-rel FLOAT no 0.30 relative threshold for ship-loss-burst detection
--full-stats no OFF include full per-turn stats table

Output Markdown layout:

# Replay seed={N} — {label}

## Meta
- file / viewpoint / winner / rewards / statuses / total_turns

## Headline stats (final)
| metric | self | opponent |

## Turning points (top 5 by ship-margin delta)
| turn | delta | side | note |

## Key events
| turn | side | type | detail |

<details><summary>Full per-turn stats</summary>  ※ --full-stats 指定時のみ
| turn | mp | op | ms | os | mpr | opr | mif | oif |
</details>

Size guard: ~600 lines / ~40KB asserted in the script. On overflow, trim events to 30 turns and force --full-stats OFF. 1v1 is the primary support; FFA is allowed with a WARN.

Risk gates this skill enforces

  • Honor the hypotheses.md skip list. When replay 分析を行わない is set, Phase 2 is skipped.
  • Adoption write-back only. Update the hypothesis-row checkbox + Iteration log row + 最終更新. Do not touch 状態:, do not append new hypothesis rows. State transitions belong to experiment-plan Step 0.5.
  • Don't conclude from n = 2. Only generate hypotheses. When n<300 で結論を出さない is set, always include a confirmation plan.
  • Never paste raw replay JSON / per-turn tables into Claude's chat. Always go via the script.
  • No code edits / commits / RunPod / Kaggle submission. Read-only on code; only the limited hypotheses.md write-back is permitted.
  • Never use Kaggle publicScore in the verdict (project rule).
  • NEXT ACTION suggestions are advisory only. Never auto-spawn other skills.

Common shapes

User says… Skill behavior
/experiment-analysis Phase 1 confirms the case → Phase 1.5 picks "直前 iter のみ" ⭐ → Phases 2–6.
"勝った試合と負けた試合を比較して" Phase 1.5 = "直前 iter"; Phase 2 picks win + loss.
"case2 の敗因を replay から深掘り" Phase 2 picks loss × 2; weight Phase 4 toward why_lost.
"iter9 で何が機能してた?" Phase 1.5 = iter9; Phase 2 picks win × 2.
"直近 inconclusive iter まとめて" Phase 1.5 = "inconclusive のみ"; pick a representative pair.
"seed=42 と seed=99 比較して" Phase 2 = "seed 直接指定"; feed the two files directly to the script.
"replay は要らない、result.md だけで分析して" hypotheses.md skip list contains replay 分析を行わない (or session-level flag) → skip mode (Phase 4 only).

Things to avoid

  • Pasting raw replay JSON into Claude's chat. Use the script.
  • Forgetting Phase 4.5 when hypotheses.md exists.
  • Touching 状態: or appending new hypothesis rows. Those are experiment-plan Step 0.5's domain.
  • Treating n = 2 as conclusive. Stay at hypothesis generation.
  • Citing Kaggle publicScore as evidence.
  • Auto-spawning /experiment-hypothesize or /experiment-plan.
  • Putting machine-generated artifacts (JSON / tables) under docs/experiment/. They go under data/output/experiment/.

Language

  • Internal reasoning and thinking should be in English
  • All user-facing output, AskUserQuestion labels/descriptions, and the analysis summary must be in Japanese (per .claude/CLAUDE.md)