gdut-thesis-formatter
adjust, review, and standardize guangdong university of technology undergraduate thesis documents according to the official formatting handbook. use when a user asks to format, reformat, polish layout
SKILL.mdSKILL.md
GitHubGDUT thesis formatter
Use this skill to turn an existing thesis draft, outline, or template into a document that follows the GDUT undergraduate graduation thesis handbook.
Working method
- Identify the user's target:
- format an existing thesis → inspect the current structure and point out mismatches first, then rewrite or restyle section by section.
- create a fresh template → generate a complete skeleton in handbook order.
- check compliance → return a checklist with pass/fail items and concrete fixes.
- Prefer the handbook rules over generic thesis conventions whenever they conflict.
- If the user gives only partial content, fix what is present and clearly note what still needs manual completion.
- Keep the user's academic content unchanged unless they also ask for language polishing.
Output modes
Choose the response format that best matches the request.
1. Compliance review
Use a structured checklist with these sections:
- page setup
- front matter
- heading hierarchy
- body text
- figures, tables, formulas
- references
- appendix and extras
- binding order
For each issue, provide:
- current problem
- required handbook rule
- exact fix
2. Direct formatting instructions
When the user is editing in Word or WPS, give explicit settings such as:
- margins
- line spacing
- font family and size
- heading level format
- page number placement
- section order
Avoid vague advice like “adjust appropriately”. Give concrete settings.
3. Template generation
When generating a template, keep the section order below and include placeholder labels.
Required thesis order
For the main bound thesis, default to this order:
- cover
- academic integrity statement
- task book
- mid-term inspection form
- review form and defense evaluation form
- defense record
- chinese abstract
- english abstract
- table of contents
- main text
- references
- acknowledgements
- appendices
- folded engineering drawings or work photos when required
For the separately bound foreign-language translation section, use:
- cover
- table of contents
- translated text (1)
- source text (1)
- translated text (2)
- source text (2)
Core formatting rules
Apply these defaults unless the user provides a department-specific exception.
Page setup
- paper size: A4
- top margin: 30 mm
- bottom margin: 25 mm
- left margin: 30 mm
- right margin: 20 mm
- line spacing: 1.5 lines
- page numbers: arabic numerals, start from the introduction/body section, place at the right side of the footer
- cover, chinese/english abstract, and table of contents do not carry thesis page numbers
Fonts
- cover thesis title: bold heiti, size 2
- chapter titles: bold heiti, size 3
- section titles: bold heiti, small 4
- clause titles: heiti, small 4
- main body: songti, small 4
- page numbers: times new roman, size small 5
- arabic numbers and latin letters in body: times new roman
Abstracts
- chinese abstract title: “摘要”, bold heiti, size 3
- chinese abstract text: songti, small 4, 1.5-line spacing
- chinese abstract length for thesis: around 400 words in chinese
- keywords line: “关键词”, bold heiti, size 4; 3 to 5 keywords separated by commas, no punctuation after the last keyword
- english abstract must match the chinese abstract in meaning
- english abstract and english keywords use times new roman
Table of contents
- use up to level 3 headings
- engineering/science and social science default numbering: 1 / 1.1 / 1.1.1
- first-level toc entries: bold heiti, small 4
- lower-level toc entries: songti, small 4
- page numbers and arabic numerals use times new roman
- toc titles and page numbers must match the body exactly
Main text structure
Default major sections:
- introduction
- main chapters
- conclusion
Rules:
- each chapter starts on a new page
- chapter titles should usually stay within 15 chinese characters
- avoid punctuation in titles
- heading hierarchy should stay unified across the whole thesis
- recommended hierarchy: chapter, section, clause, item, sub-item
- spacing before and after section and clause headings: 0.5 line
References in text
- use a unified citation style throughout
- use superscript reference markers at the end of the cited content when appropriate
- reference numbers appear in square brackets, such as [1]
- do not place citation markers in titles
Formulas
- write formulas on a separate centered line
- place formula number flush right in parentheses
- number by chapter, for example (1.1)
- appendix formulas use appendix prefix, for example (A1)
- when a formula wraps, break at =, +, -, ×, or ÷ and do not place the operator at the start of the new line
Tables
- every table needs a table number and title above the table, centered
- numbering by chapter, such as table 2.1
- table title format: bold heiti, size 5; digits and letters in bold times new roman, size 5
- do not use left and right outer borders
- do not split the table header from the table across pages
- use “-” for empty numeric cells rather than ditto-style marks
- table notes go below the table in songti, size small 5
Figures
- every figure needs a figure number and title below the figure
- numbering by chapter, such as figure 3.1
- figure title uses songti, size 5
- explanatory notes go above the figure title in songti, size small 5
- figures and figure titles must stay on the same page
- if the remaining space is insufficient, move the whole figure block to the next page
- coordinate charts must state axis names and units
References list
- follow gb/t 7714-2015
- heading “参考文献” centered
- entries numbered with square brackets in order of first appearance
- every entry ends with a full stop
- preserve the correct type markers such as [J], [M], [C], [D], [R], [S], [P], [N], [EB/OL]
Appendix
- appendices use labels such as appendix a, appendix b, appendix c
- appendix figures, tables, and formulas use appendix-prefixed numbering, such as figure A1, table B2, formula (B3)
Type-specific minimum requirements
When the user asks whether the thesis is long enough or sufficiently sourced, apply these checks:
- engineering design: at least 15000 chinese characters; at least 10 references; at least 2 foreign-language references
- theoretical research: at least 20000 chinese characters; at least 15 references; at least 4 foreign-language references
- experimental research: at least 15000 chinese characters; at least 10 references; at least 2 foreign-language references
- software development: at least 10000 chinese characters; at least 10 references; at least 2 foreign-language references
- comprehensive type: at least 10000 chinese characters; at least 10 references; at least 2 foreign-language references
- economics/management/humanities: at least 18000 chinese characters; at least 15 references; at least 2 foreign-language references
- law: at least 8000 chinese characters; at least 15 references; at least 2 foreign-language references
- art/design: at least 8000 chinese characters; at least 8 references; at least 2 foreign-language references
Foreign literature translation requirement
When the user asks about the translation appendix, apply this default rule:
- translate at least 20000 printed foreign-language characters or at least 5000 chinese characters
- art/design majors may use the lower range in the handbook
- the translated material should be closely related to the thesis topic
How to handle user requests
When the user uploads a draft
- identify existing sections
- compare them to the required order and formatting rules
- give the shortest path to compliance
- when editing text directly, preserve meaning and citations
When the user asks for “帮我调格式”
Return in this order:
- non-compliant items
- exact formatting settings to change
- corrected sample block for one heading, one paragraph, one figure caption, one table caption, and one reference entry if useful
When the user asks for a template
Generate placeholders for:
- cover fields
- chinese abstract and keywords
- english abstract and keywords
- toc
- introduction
- chapter headings
- conclusion
- references
- acknowledgements
- appendices
When the user asks for a final pre-submission check
Verify at minimum:
- page margins and line spacing
- page numbering start position
- heading hierarchy consistency
- abstract completeness and keyword count
- figure/table/formula numbering
- reference format and count
- appendix numbering
- binding order completeness
Reference file
Load references/gdut-handbook-checklist.md when you need the concise rule table and submission checklist.