dev-bump-zudo-deps

Bump every `@takazudo/*` registry dependency in the current project to its newest version, resolving each by the channel it currently tracks. Use when: (1) User says '/dev-bump-zudo-deps', 'bump zudo

SKILL.md

GitHub

dev-bump-zudo-deps — Bump all @takazudo/* deps to latest

Discover every @takazudo/* dependency that resolves to the npm registry across all package.json files in the project, bump each to the newest version on the channel it already tracks, install, and verify the project still builds.

The fragile part — finding the deps, classifying each spec's channel, and computing the target with correct prerelease semver — is done deterministically by scripts/resolve-bumps.mjs, so it never depends on the model recomputing version math by hand.

Resolution rule (what "bump" means per dep)

The dep's current spec decides the channel, and only deps pinned to a concrete version get rewritten — specs that float are reported but left alone, because rewriting them would silently turn a deliberate choice into a hard pin:

Current spec Resolved to Action
0.1.0-next.58 (a -next.* prerelease pin) newest release on the next line ✏ bump
^1.2.0-beta.3 (any other prerelease line) newest release on that line ✏ bump
1.2.3 / ^1.2.3 / ~1.2.3 (stable semver) newest stable (dist-tags.latest) ✏ bump
next / latest / beta (a dist-tag string) reported (what the tag points at now) tag
* / x / empty (floating) — skip
workspace: / file: / link: / git / url — skip

Write-back preserves what was there: an exact pin stays exact, ^/~ operators are kept, and a prerelease-pinned dep stays on its own line. A dep declared via a dist-tag string (next, latest, …) is intentionally not rewritten — it already floats to that tag on install, so the script just reports what the tag currently resolves to (with a stale-tag/graduation note) and leaves the pinning decision to you. Non-registry specs (workspace:*, file:, link:, portal:, catalog:, npm: aliases, git/url) are left untouched — bumping a workspace:* dep would break the monorepo.

The one gotcha worth knowing: the next dist-tag can be stale

For prerelease lines, the npm next dist-tag sometimes points at an older version than what's actually published (or than latest). "Newest next" means the highest published -next.* version, not whatever the next tag literally says. The script already resolves this by scanning the full version list and flags two cases in its report:

  • stale tag — next dist-tag < newest published next version (script uses the newest).
  • graduation — latest is higher than the newest next (the line may have moved to stable); this is a human call, so surface it instead of silently switching channels.

Step 1 — Resolve the plan (dry-run)

From the project root (running without --write is a dry-run):

node "$HOME/.claude/skills/dev-bump-zudo-deps/scripts/resolve-bumps.mjs"

--dry-run is a top-level contract for the whole skill: resolve + assess + report only — no package.json writes, no installs, no vendored-artifact copies, no ZUDO_DEPS_PINS.md updates.

It prints one row per @takazudo/* dep — bump / up-to-date / tag / skip / error — with current → target and any stale-tag/graduation notes, plus a Scanned N package.json line. Pass exact package names to limit scope (… resolve-bumps.mjs @takazudo/zfb @takazudo/zfb-runtime); --json adds a machine-readable plan.

  • If every dep is up-to-date (or only tag/skip rows remain), skip to Step 7 — a project can still have vendored artifacts to sync even with zero registry bumps. Only after that check report "already on latest" and stop.
  • An error row can mean the package is genuinely unpublished or a registry/auth/offline issue — if every lookup errored the script says so; confirm npm view @takazudo/<pkg> works from this shell before concluding a package is missing.
  • tag/skip rows are deliberately not rewritten — surface them so the user can pin or update those manually if they want.
  • The scan does not follow symlinks, so a symlinked nested workspace won't be found; sanity-check the Scanned N count against the project.
  • The scan skips nested checkouts — any directory below the root that itself has a .git entry (dir, file, or symlink), such as a linked worktree or a vendored clone — so --write never touches another checkout's package.json.

Read the table before writing and act on any flagged note — a graduation warning means asking the user whether to follow the line to stable rather than silently staying on the prerelease channel.

Step 2 — Assess upstream changes (changelog + code diff)

For each bump row, find out what actually changed upstream between the pinned and target versions before touching the consumer project. Full procedure: references/upstream-impact.md. The short of it:

  1. Resolve the upstream repo — npm view <pkg> repository.url (+ repository.directory for the monorepo package dir). Follow only first-party orgs (Takazudo/*, zudolab/*).
  2. Resolve both commits — npm view <pkg>@<ver> gitHead for old and new, verifying each hash exists in the repo (gh api repos/<o>/<r>/commits/<sha>); fall back to matching git tags (<pkg>@<ver> changesets convention, v<ver>, <ver>). Unresolvable → changelog-only mode, stated in the report — never guess a commit.
  3. Read the changelog slice first (package-dir CHANGELOG.md at the new ref, or GitHub releases) — highest signal, cheapest.
  4. Diff the published tarballs — npm diff --diff=<pkg>@<old> --diff=<pkg>@<new> (name-only survey, then targeted files). This is the primary technical check: it is what consumers actually receive, and needs no repo/commit resolution at all.
  5. Repository diff only when source context is needed — gh api repos/<o>/<r>/compare/<old>...<new> by default (no clone; watch the 300-file truncation cap and non-linear histories), blobless clone into the session scratchpad as the fallback. Scope to the package dir; look at the public surface: exports, peerDependencies, config schema/options, template markup and CSS classes.
  6. Write a per-package impact note — breaking changes, renamed options, new required config, or "none found — plain bump". These notes drive the consumer-side edits and make any later verify failure diagnosable against a known diff.

For a ranged spec (^/~), "old" is the lockfile's installed version, not the spec's lower bound — comparing from the manifest floor overstates the upgrade.

This step is timeboxed hints-gathering, not an audit — changelog + surface diff, then move on. All of it is read-only recon: no edits, installs, or commits happen here, and never inside an upstream clone.

Step 3 — Apply the bumps

node "$HOME/.claude/skills/dev-bump-zudo-deps/scripts/resolve-bumps.mjs" --write

--write does a minimal in-place string edit per dep (it preserves each file's formatting). The same package appearing in several package.json files is moved to the same target everywhere; the script warns (⚠ … multiple targets) if anything would diverge.

Step 4 — Check peer coupling

First-party families often pin each other. Before installing, confirm a bumped package's peers are satisfied by the other targets — bump coupled packages together so the install resolves:

npm view <bumped-pkg>@<target> peerDependencies

If a peer requires a version the plan didn't reach (common with exact-pinned prerelease lines where ^x-next.40 does NOT satisfy next.41), re-run Step 1/3 including that peer so the whole family lands on a mutually compatible set.

Step 5 — Install

Use the project's package manager (check packageManager in package.json / the lockfile — pnpm-lock.yaml → pnpm, package-lock.json → npm, yarn.lock → yarn). Prefer a project-provided safe-install script if one exists (e.g. pnpm install:safe).

pnpm install        # or: npm install / yarn install

Independent nested workspaces install separately. After --write, the script prints the distinct directories it edited — install in each one that has its own lockfile (a nested workspace with an independent lockfile is not covered by the root install), and commit every changed lockfile:

pnpm install             # root workspace
cd doc && pnpm install   # any printed dir that has its own lockfile

Step 6 — Verify

Run the project's checks and build to prove the bump didn't break anything. Use whatever the project defines:

pnpm typecheck && pnpm build      # or: pnpm check, pnpm test, per the project's scripts

For a monorepo, build each workspace the bump touched, not just the root. Read the output — a green typecheck/build is the bar. If a build breaks, the new version likely changed an API or a peer; report the failure with the offending package rather than forcing the bump through.

Step 7 — Sync vendored / generated artifacts (ZUDO_DEPS_PINS.md)

Always check for ZUDO_DEPS_PINS.md at the project root — even when Step 1 found zero registry deps. Some projects consume a first-party package without any package.json pin: a doc site generated by zudo-doc, template HTML/CSS copied and adapted from an upstream. Provenance for those lives in ZUDO_DEPS_PINS.md; full format + workflow: references/zudo-deps-pins.md. The short of it:

  • File exists → for each entry: resolve the upstream latest, diff pinned..latest scoped to the entry's source: paths (same mechanics as Step 2), and sync by the preferred strategy — regenerate, re-copy, or manual merge — re-applying the local customizations listed in notes: and re-diffing to confirm none were lost. Then update pinned:/updated: and commit the pins file in the same commit as the synced artifacts.
  • File missing, but this run touches vendored artifacts → create it: one entry per upstream with best-effort provenance, using the honest-unknown convention (pinned: unknown — recorded <date>, upstream HEAD was <hash>) when the true origin is lost. Never state a guessed pin as fact.
  • File missing and nothing vendored → skip; do not create an empty pins file.

Step 8 — Report

Summarize for the user:

  • Bumped: pkg old → new (note next-channel vs stable)
  • Upstream impact: the Step 2 per-package notes — consumer-side edits made, or "none found"; call out any package where the code diff was skipped (changelog-only) and why
  • Up-to-date / skipped: counts (and which were skipped as workspace:/non-registry)
  • Flags: any stale-tag or graduation warnings from Step 1, and the decision taken
  • Vendored artifacts: pins-file entries synced / already current / created (or "no ZUDO_DEPS_PINS.md, nothing vendored")
  • Verify result: typecheck/build status per workspace
  • Lockfiles changed: which ones (so they get committed)

Leave committing to the user / /co unless they asked otherwise.

Step 9 — File upstream reports for anything the bump surfaced

The bump is the moment first-party problems show up — a stale/misleading dist-tag, a removed or broken export, a regression in the new version, or a consumer-side fix that should have shipped as a package change. File these on the source repo so they get fixed at the root instead of worked around forever, via the /dev-upstream-report skill:

Skill tool: skill="dev-upstream-report"  args="<concise description + evidence>"

Privacy guardrail — this skill runs in arbitrary repos, some of them private client work. When writing an upstream report (or any external artifact), describe the problem in terms of the public package (name + version + a minimal repro), and:

  • Name the source repo only when it is one of the first-party accounts — Takazudo/* or zudolab/* (e.g. Takazudo/zudo-front-builder, zudolab/zudo-doc). If the upstream is not one of those, do not assume a repo.
  • Never include the consuming project's name, directory paths, internal URLs, or any client/company identifiers. A private client project must not be named or hinted at in a public issue. Strip paths down to the package-relevant minimum.