ase-docs-shorten

Shorten a document toward a target length, given as either `--chars <N>` or `--words <N>`: first tighten the sentences, then drop low-value content, then compress the remaining content into shorter ex

SKILL.md

GitHub

@${CLAUDE_SKILL_DIR}/../../meta/ase-control.md @${CLAUDE_SKILL_DIR}/../../meta/ase-skill.md @${CLAUDE_SKILL_DIR}/../../meta/ase-dialog.md @${CLAUDE_SKILL_DIR}/../../meta/ase-getopt.md

<purpose name="ase-docs-shorten"> Shorten a Document to a Target Length </purpose>

<expand name="getopt" arg1="ase-docs-shorten" arg2="--auto|-a --chars|-c=0 --words|-w=0"> $ARGUMENTS </expand>

<objective> *Shorten* the document of `<getopt-arguments/>` until it reaches the requested *target length* by running three *stages* in order -- tighten the sentences, drop low-value content, compress the remaining content into shorter expressions -- and entering each stage *only* while the target is still not met. </objective>

Ground Rule

This skill removes text, so unlike ase-docs-refine it MAY lose content. It still MUST NOT corrupt whatever survives: every fact, number, technical term, qualifier, and negation which survives into the shortened text stays exactly as it was, no content is invented, the order of the surviving argument is kept, and fenced code blocks, inline code spans, link targets, Markdown frontmatter, and the heading structure are never touched.

The skill also MUST NOT shorten beyond the target: it stops at the first change which reaches the target, so a document is never cut more than the user asked for.

<flow>
  1. <step id="STEP 1: Resolve Target and Document">

    1. Determine the target length from the two mutually exclusive options. Set <chars/> to <getopt-option-chars/> and <words/> to <getopt-option-words/>, treating a non-numeric or negative value as 0. Then dispatch:

      • <if condition="<chars/> is `0` and <words/> is `0`">

        Only output the following <template/> and then IMMEDIATELY STOP all further skill processing:

        <template> ⧉ **ASE**: ✪ skill: **ase-docs-shorten**, ▶ ERROR: a target length is required -- pass either `--chars <N>` or `--words <N>` </template> </if>
      • <if condition="<chars/> is not `0` and <words/> is not `0`">

        Only output the following <template/> and then IMMEDIATELY STOP all further skill processing:

        <template> ⧉ **ASE**: ✪ skill: **ase-docs-shorten**, ▶ ERROR: `--chars` and `--words` are mutually exclusive -- pass only one of them </template> </if>
      • <if condition="<chars/> is not `0`"> Set <unit>chars</unit> and <target><chars/></target>. </if> <else> Set <unit>words</unit> and <target><words/></target>. </else>

      Do not output anything else in this substep.

    2. Silently resolve <getopt-arguments/> to the list <documents/> of individual document files, expanding any directory or wildcard reference with the Glob tool. Then dispatch:

      • <if condition="<documents/> is empty">

        Only output the following <template/> and then IMMEDIATELY STOP all further skill processing:

        <template> ⧉ **ASE**: ✪ skill: **ase-docs-shorten**, ▶ ERROR: no document to shorten </template> </if>
      • <if condition="<documents/> carries more than one document">

        A target length applies to one document, so a reference which expands to several documents is ambiguous: it is unclear whether the target bounds each document or their sum. Set <count/> to the number of documents, then only output the following <template/> and IMMEDIATELY STOP all further skill processing:

        <template> ⧉ **ASE**: ✪ skill: **ase-docs-shorten**, ▶ ERROR: **<count/>** documents referenced -- a target length applies to exactly one document </template> </if>

      Set <file/> to the single document of <documents/>.

    3. Do not output anything else in this STEP 1.

    </step>
  2. <step id="STEP 2: Investigation"> <if condition="<ase-project-boxing/> is equal `black`">

    The project source artifacts are classified as a black box, so the user does not want them inspected or their problems surfaced. Skip the entire investigation and reporting: do not invoke any Agent tool and do not read any document, only output the following <template/> and then SKIP the remaining steps STEP 3, STEP 4, and STEP 5:

    <template> <ase-tpl-bullet-normal/> **SHORTEN**: *suppressed* (`project.boxing` is `black`) </template> </if>

    First, use the following <template/> to give a hint on this step:

    <template> <ase-tpl-bullet-secondary/> **SHORTENING INVESTIGATION**: `<file/>` → **<target/>** <unit/> </template>

    Dispatch the investigation to a sub-agent via the Agent tool so that no investigation details leak into the user-visible transcript. The sub-agent performs the silent reading, measuring, and shortening; only its final structured return value is consumed here. As a target length applies to exactly one document, exactly one sub-agent is invoked, which keeps the length budget coherent:

        Agent(
        description:       "Shorten Investigation",
        subagent_type:     "ase:ase-docs-shorten",
        prompt:            "UNIT:   <unit/>\nTARGET: <target/>\nFILE:   <file/>",
        run_in_background: false
    )

    Parse the result message of the Agent tool invocation as a JSON object. Set <length-before/> to its length_before field, <length-projected/> to its length_projected field, and <blocks/> to its blocks array, ordered by ascending line.

    You MUST NOT output anything at all in this STEP 2 beyond the above hint template and the Agent tool invocation.

    </step>
  3. <step id="STEP 3: Summary"> <if condition="<blocks/> is empty">

    The document already meets the target, so nothing is shortened. Only output the following <template/> and then SKIP the remaining steps STEP 4 and STEP 5:

    <template> <ase-tpl-bullet-normal/> **ALREADY SHORT ENOUGH**: **<length-before/>** <unit/> ≤ **<target/>** <unit/> </template> </if>

    Use the following <template/> to give a summary of the proposed shortenings in <blocks/>:

    <template> <ase-tpl-bullet-secondary/> **SHORTENING SUMMARY**:
    Shortening Stage Shortening Result
    TIGHTEN: <t/> blocks proposed
    DROP: <d/> blocks proposed
    COMPRESS: <c/> blocks proposed
    </template>

    Hints:

    • <t/> is the number of blocks with stage equal to TIGHTEN in <blocks/>
    • <d/> is the number of blocks with stage equal to DROP in <blocks/>
    • <c/> is the number of blocks with stage equal to COMPRESS in <blocks/>
    </step>
  4. <step id="STEP 4: Shortening">

    1. Mark this skill as the active edit-capable skill so that the ASE pre-tool-use hook auto-approves the subsequent Edit invocations on any invocation path (slash command or Skill tool). Call the ase_state_set(key: "skill", val: "ase-docs-shorten", session: "<ase-session-id/>") tool from the ase MCP server. Do not output anything in this substep.

      Critical safety invariant: the marker set here grants Edit auto-approval and MUST be cleared again (substep 3 below) before this skill yields control, regardless of how the iteration in substep 2 ends - whether it completes normally, is aborted early (e.g. an Edit failure, an unparseable value, or any other unexpected condition), or is otherwise interrupted. If you ever stop or bail out of substep 2 early, you MUST still perform substep 3 first. Never leave this marker active for a later, unrelated Edit.

    2. Set <total/> to the number of blocks in <blocks/> and <index/> to 0. Then iterate over all blocks:

      <for items="<blocks/>">

      1. Increment <index/> by one (the 1-based position of the current <item/> within <blocks/>). Set <stage/> to the stage field of <item/>. Set <line/> to the line field of <item/>. Set <description/> to the description field of <item/>. Set <old-text/> to the old_text field of <item/>. Set <new-text/> to the new_text field of <item/>. Set <block-before/> to the length_before field of <item/>. Set <block-after/> to the length_after field of <item/>.

        Then verify the Ground Rule for this <item/>: compare <new-text/> against <old-text/> and drop the <item/> entirely -- continuing with the next <item/> without any output -- whenever a fact, number, technical term, qualifier, or negation which survives into <new-text/> was altered, whenever <new-text/> states something <old-text/> did not, or whenever a fenced code block, an inline code span, a link target, or a heading was touched.

        Then set <block-delta/> to (<block-before/> - <block-after/>) and <block-percent/> to that difference expressed as a rounded percentage of <block-before/>, so the reviewer sees what the block actually saves.

        Then set <context-before/> and <context-after/> to empty and normalize the change to its minimal form, so that the proposed diff shows exactly the lines the later Edit will actually change: while the first line of <old-text/> is identical to the first line of <new-text/>, move that line from both to the end of <context-before/> and increment <line/> by one; likewise, while the last line of <old-text/> is identical to the last line of <new-text/>, move that line from both to the front of <context-after/>. Finally, trim <context-before/> to its last two lines and <context-after/> to its first two lines.

        Then, unless <ase-project-boxing/> is equal grey (where the full unified diff is suppressed and no context lines are rendered at all), silently read the current content of <file/> with the Read tool - reusing the content read earlier in this iteration, unless an Edit was applied in between - and set <file-lines/> to its lines, stripped of the line-number prefixes the tool adds. Set <file-lines/> to empty if the file cannot be read.

        Whenever <file-lines/> is non-empty, re-derive both context parts from it, so the rendered diff shows real context: set <context-before/> to the up to two lines of <file-lines/> directly before line <line/> (empty if <line/> is 1) and <context-after/> to the up to two lines of <file-lines/> starting at line (<line/> + <n/>), where <n/> is the number of lines in <old-text/> (empty if that line is beyond the end of the document).

      2. Report the proposed block with the following <template/>:

        <template> <ase-tpl-bullet-signal/> [<index/>/<total/>]: **<stage/> BLOCK**: `<file/>`:<line/>: <description/> </template>
      3. <if condition="<getopt-option-auto/> is not equal `true` and <ase-project-boxing/> is equal `grey`">

        The project source artifacts are classified as a grey box, so the user does not want the full artifact internals surfaced: suppress the full unified diff and instead show only a condensed two-line hunk. Unlike a proofreading correction or a refinement, a shortening block spans whole paragraphs, so both sides MUST be normalized and elided onto one line each -- an unelided side-by-side collapse exceeds the terminal width and wraps into an unreadable run.

        Determine <old-snippet/> from <old-text/> by replacing every run of whitespace (line breaks included) with a single space and trimming the result, then -- only if it is longer than 100 characters -- keeping just its first 60 and last 30 characters, joined by […]. Determine <new-snippet/> the same way from <new-text/>, or set it to ∅ when <new-text/> is empty for a pure removal. Then report the shortening with the following <template/>, emitting both snippet lines verbatim (no wrapping, no extra blank lines):

        <template>

        <ase-tpl-bullet-normal/> <stage/> SHORTENING (<block-before/> → <block-after/> <unit/>, -<block-percent/>%):

        - <old-snippet/>
+ <new-snippet/>
        </template> </if> <elseif condition="<getopt-option-auto/> is not equal `true`">

        Determine the hunk body as an ordered list of lines, each carrying a one-character prefix ( for context, - for old-side, + for new-side). Build it by concatenating, in order and skipping any part that is empty:

        • one -prefixed line for each line of <context-before/> (if non-empty),
        • one --prefixed line for each line of <old-text/> (if non-empty; split <old-text/> on newlines),
        • one +-prefixed line for each line of <new-text/> (if non-empty; split <new-text/> on newlines),
        • one -prefixed line for each line of <context-after/> (if non-empty).

        Set <hunk-body/> to those prefixed lines joined by newlines.

        Set <old-count/> to the number of old-side hunk lines, i.e., the combined line count of <context-before/>, <old-text/>, and <context-after/> (each empty part counts as 0). Set <new-count/> to the number of new-side hunk lines, i.e., the combined line count of <context-before/>, <new-text/>, and <context-after/> (each empty part counts as 0).

        Set <old-start/> to the 1-based line number of the first old-side hunk line: if <context-before/> is non-empty, that is the line of its first context line, i.e., <line/> minus the number of lines in <context-before/>; otherwise it is <line/> itself (the first line of <old-text/>). Set <new-start/> to the same value as <old-start/>, but clamped to a minimum of 1 whenever <new-count/> is greater than 0 (the shortened side then has a real first line).

        Render the proposed shortening as a unified diff with up to two lines of context in a fenced block based on the following <template/>, emitting <hunk-body/> verbatim (one already-prefixed line per line, with no extra blank or space-only lines):

        <template>

        <ase-tpl-bullet-normal/> <stage/> SHORTENING (<block-before/> → <block-after/> <unit/>, -<block-percent/>%):

        --- <file/> (original)
+++ <file/> (shortened)
@@ -<old-start/>,<old-count/> +<new-start/>,<new-count/> @@
<hunk-body/>
        </template> </elseif>
      4. <if condition="<getopt-option-auto/> is not equal `true`">

        In the following, you MUST NOT use your built-in <user-dialog-tool/> tool! Instead, you MUST just show a custom dialog according to the expanded custom-dialog definition. You MUST closely follow this definition:

        <expand name="custom-dialog" arg1="--other"> SHORTENING: How would you like to proceed with this proposed shortening? ACCEPT: Apply this proposed shortening. REJECT: Skip this proposed shortening. </expand> </if> <else>

        Set <result>ACCEPT</result>.

        </else>

      5. Check <result/> and dispatch accordingly:

        • <if condition="<result/> is 'ACCEPT'">

          Invoke the Edit tool to apply the change by replacing <old-text/> with <new-text/> at <file/>:<line/>. The operation will be auto-approved by the ASE pre-tool-use hook (which tracks the active skill), so no interactive permission prompt will appear. Then continue with the next <item/>.

          </if>
        • <if condition="<result/> starts with 'OTHER'">

          Generate a new proposal for the same <item/>, incorporating the user's free-text hint from <result/> after the "OTHER:" prefix. Reassign <description/>, <old-text/>, <new-text/>, <block-before/>, and <block-after/> to reflect this refined proposal (<old-text/> stays anchored to the existing text at <file/>:<line/>; <new-text/> and <description/> carry the new shortening) so the subsequent rendering and any Edit use the new proposal rather than the original. Then re-apply the minimal-form normalization and the context re-derivation of substep 1 to the refined <old-text/> and <new-text/> (so the re-rendered diff again shows exactly the changed lines) and go back to substep 2 of this for-iteration. There is no cap on refinement rounds - keep refining until the user picks ACCEPT or REJECT.

          </if>

        • <if condition=" <result/> is 'REJECT' or <result/> is 'CANCEL' or <result/> starts with 'ERROR' ">

          Skip this <item/> without any Edit call and continue with the next <item/>.

          </if>
      </for>

    3. Clear the active edit-capable skill marker now that all Edit invocations are done, so a later unrelated Edit is not auto-approved. Call the ase_state_delete(key: "skill", session: "<ase-session-id/>") tool from the ase MCP server. Do not output anything in this substep.

    </step>
  5. <step id="STEP 5: Length Report">

    1. Silently call the ase_text_metric(file: "<file/>") tool of the ase MCP server and set <length-after/> to the <unit/> field of its result, so the report states the measured, achieved length rather than the projected one -- rejected blocks otherwise falsify the numbers. Then set <reduction/> to (<length-before/> - <length-after/>) and <percent/> to that reduction expressed as a rounded percentage of <length-before/>. Do not output anything in this substep.

    2. Report the achieved length with the following <template/>:

      <template> <ase-tpl-bullet-secondary/> **LENGTH REPORT**: `<file/>`
      Length Metric Length Value
      BEFORE: <length-before/> <unit/>
      AFTER: <length-after/> <unit/>
      TARGET: <target/> <unit/>
      REDUCTION: <reduction/> <unit/> (<percent/>%)
      </template>
    3. <if condition="<length-after/> is less than or equal to <target/>"> <template> <ase-tpl-bullet-normal/> **TARGET MET** </template> </if> <else>

      Set <missed/> to (<length-after/> - <target/>).

      <template> <ase-tpl-bullet-signal/> **TARGET MISSED** by **<missed/>** <unit/> (rejected shortenings) </template> </else>

    4. You MUST NOT output any further additional explanations or summaries at the end of this skill processing, except for the following final <template/>:

      <template> <ase-tpl-bullet-secondary/> **SHORTEN FINISHED** </template>

    5. Finally, give the closing hint by expanding the following (which, depending on the configured <ase-guidance-level/>, may expand into nothing and hence emit no output at all):

      <if condition="<getopt-option-auto/> is not equal `true`"> <ase-tpl-hint level="verbose"> Use `/ase-docs-shorten --auto` to apply all shortenings unattended. </ase-tpl-hint> </if>
    </step>
</flow>

Похожие навыки: documents

applying-brand-guidelines-anthropics-claude-cookbooks

This skill applies consistent corporate branding and styling to all generated documents including colors, fonts, layouts...

Автор: anthropics
31,757

docx

Comprehensive document creation, editing, and analysis with support for tracked changes, comments, formatting preservati...

docx
Автор: anthropics
24,530

pdf

Comprehensive PDF manipulation toolkit for extracting text and tables, creating new PDFs, merging/splitting documents, a...

pdf
Автор: anthropics
24,530