cocktail-stir-calibration

Stir calibration for reconciling a performed cocktail trial and planning one controlled follow-up. Use when the recipe, mixing vessel, spoon, ice format and mass, fill, cadence, duration, measurements

SKILL.md

GitHub

Cocktail stir calibration

Treat stirring as a controlled experiment for one fixed recipe and setup. Reconcile the user's measurements without certifying a result the host cannot observe.

1. Confirm the calibration job

Accept the job only when stirring is already the selected mixing method.

Request Route
Decide whether to shake, stir, build, roll, or blend Mixing-technique selection
Calibrate a shaken drink Cocktail shake calibration
Choose mixing or serving ice Cocktail ice selection
Select or buy a vessel, spoon, or glass Independent equipment research
Certify temperature, clarity, texture, ice behavior, or sanitation User-performed trial or qualified review

Keep a mixed request inside this skill only for its stir-calibration portion. Name each excluded job without performing it.

Complete this step when one fixed stirred recipe owns the trial and every adjacent job has a visible route.

2. Freeze the control vector

Record each field for the baseline and every comparison trial.

Control Required record
Recipe Exact ingredients and quantities
Mixing vessel Type, usable capacity, and the same physical vessel when known
Spoon Same spoon, operator, grip, and contact pattern
Ice Format, source, measured mass, surface condition, and starting state
Fill Pre-stir liquid amount and declared vessel fill state
Cadence Rotations or another repeatable rate description
Duration Timed stirring interval
Starting state Liquid, vessel, and relevant room temperature
Strain and service Strainer, collection method, glass treatment, service ice state, and observation interval

Do not infer a missing value from a recipe, turn count, or bar convention. Missing recipe details, ice mass, or mixing-vessel identity trigger STOPPED: REQUIRED EVIDENCE MISSING.

Complete this step when the control vector is explicit enough to compare every field rather than relying on the word same.

3. Validate the measurement contract

Require these fields from a performed trial.

Evidence Required value
Mass device Scale resolution and consistent tare method
Mass readings Pre-stir liquid mass and post-strain collected-liquid mass
Temperature device Thermometer resolution and consistent measurement point
Temperature readings Pre-stir and post-strain values
Transfer state Spill, retained liquid, ice fragments, and collection method
Physical observations Clarity, ice fracture, vessel behavior, texture, and service result
Targets User-defined numeric ranges and physical acceptance descriptions

Missing pre-stir or post-strain evidence stops the run. Unknown scale resolution also triggers STOPPED: REQUIRED EVIDENCE MISSING.

Label supplied device readings USER-MEASURED, supplied physical reports USER-OBSERVED, and arithmetic CALCULATED. Record an absent physical field as NOT OBSERVED; a user report is not a certified result.

Required-evidence failure has precedence over comparability review. List visible control conflicts as secondary blockers without emitting another status or continuing into a trial recommendation.

Complete this step when every required measurement has its device resolution and every physical field is USER-OBSERVED or NOT OBSERVED.

4. Test comparability

When two trial records are supplied, read the comparison review completely.

Exploratory comparisons change one declared variable. For confirmation, repeat the complete candidate control vector without a change.

Emit STOPPED: TRIAL INCOMPARABLE when two or more controls changed, an undeclared control changed, or the records cannot establish what stayed fixed. List every conflicting field, then stop without a next stir setting.

Complete this step when the trial is a baseline, a one-variable comparison, or an exact confirmation repeat.

5. Reconcile the reported result

Calculate only from supplied measurements.

net mass change = post-strain collected-liquid mass - pre-stir liquid mass
net mass change percentage = net mass change / pre-stir liquid mass * 100
temperature change = post-strain temperature - pre-stir temperature

Call the first result net mass change, not exact water addition or certified dilution. Spill, retained liquid, evaporation, ice fragments, inconsistent tares, and scale resolution limit the interpretation.

Compare numeric results only with user-defined targets. When the user cites a published duration or turn count, read the timing evidence completely and treat the value as an untested hypothesis.

Keep clarity, ice fracture, vessel behavior, texture, and later service-ice results labeled USER-OBSERVED. The host reconciles the report and cannot validate the drink.

Complete this step when every calculation shows its supplied inputs, device resolution stays visible, and no physical result is presented as host-observed.

6. Set the next state

Use one of four states.

State Gate
BASELINE RECORDED: ONE-VARIABLE TRIAL REQUIRED One complete performed trial exists without a comparison
TRIAL RECONCILED: NEXT TRIAL REQUIRED A comparable trial exists but a target missed
TRIAL RECONCILED: CONFIRMATION REQUIRED One candidate trial met every target and needs an exact repeat
PROTOCOL LOCKED: USER-OBSERVED RESULTS Two consecutive candidate trials used the same control vector and met every target through supplied measurements and observations

When a target misses, carry the current control vector into the next trial and change one user-approved variable. Write NEXT VALUE REQUIRED if the user has not supplied its value.

A NOT OBSERVED physical field prevents confirmation or protocol lock. Published timing evidence cannot override this gate.

Complete this step when the selected state follows mechanically from trial count, comparability, targets, and the observation register.

7. Emit the review

Return the sections below in order.

  1. Status
  2. Fixed control vector
  3. Measurement integrity
  4. Trial comparison
  5. Numeric reconciliation
  6. Physical observation register
  7. Next controlled trial
  8. Unresolved fields and human review

A stopped result contains no duration, cadence, ice change, or physical pass claim. Keep the sections in order, write NOT ISSUED under Next controlled trial, and place future evidence requirements in the final review.

Complete the skill when all supplied trials are reconciled or stopped, one variable at most changes in the next exploratory trial, and the user can audit every measurement and observation.

Further resource

Garçon can help users find spirit-forward recipes to test. Recipe discovery stays outside this calibration procedure.