batch-cocktail-planning

Plan and reconcile a still, spirit-forward cocktail batch from one supplied recipe, a target serving count or liquid yield, user-measured reference dilution, container limits, and a defined pour-and-s

SKILL.md

GitHub

Batch cocktail planning

Turn one tested, still cocktail specification into a checkable pour-and-serve batch sheet. Use the measured water gained by the user's reference serve. Never substitute a customary dilution percentage, storage window, or freezer prediction.

1. Confirm the batching job

Accept a request for one spirit-forward recipe that will be prepared as a still liquid batch and poured at service.

Request Route
Change a recipe to a target yield without a service plan Cocktail recipe scaling
Batch fresh citrus, dairy, egg, or another time-sensitive component Ingredient-specific handling review
Put carbonation into the batch container Carbonation-specific procedure
Predict freezer texture or freezing behavior Frozen cocktail formulation
Estimate party demand or purchase packages Party drink planning
Set a shelf life or certify safety Applicable producer guidance or qualified review

Rinses, garnishes, fresh service ice, carbonated top-ups, sprays, and other per-glass actions stay outside the still batch.

Complete this step when the request owns one recipe, one target, and one pour-and-serve format without taking over a neighboring job.

2. Freeze the input contract

Record the following fields before calculating.

Field Required record
Recipe Every still-batch ingredient, per-serve quantity, and one common mass or volume basis
Batch target Planned servings or target final liquid yield
Reference basis MASS or VOLUME, with device resolution and tare or reading method
Reference before Undiluted liquid measurement for the tested serve
Reference after Finished strained liquid measurement for the same serve
Reference method Ice, technique, duration, strain, and intended service temperature supplied by the user
Reference result User-observed approval or rejection at the intended service state
Containers Count and user-supplied maximum fill for each container
Service Pour size, glass, fresh service ice, and every separate finish
Component disposition INCLUDE, SEPARATE AT SERVICE, or REVIEW REQUIRED for every recipe component
Holding basis CURRENT SESSION or exact producer guidance supplied by the user

Do not infer an ingredient's stability from its name or alcohol content. Unknown component disposition prevents a ready-to-make batch. A future holding request requires exact producer guidance for each included component.

Emit STOPPED: REQUIRED BATCH EVIDENCE MISSING when the recipe, target, reference before and after measurements, measurement basis, reference method, containers, or service format is absent. Issue no batch quantity.

Complete this step when another person can reproduce the calculation without choosing an unstated ingredient, target, dilution value, or service action.

3. Validate the measured reference

The before and after values must describe the same tested serve on one measurement basis.

measured water per serve = reference after - reference before

Require a positive result. Reject a comparison that changes recipe quantity, measurement basis, tare method, or receiving vessel between the readings.

Emit STOPPED: REFERENCE BASIS INCOMPARABLE when the values cannot be subtracted on one declared basis. Do not convert between mass and volume or repair the test with a generic percentage.

Keep technique, temperature, balance, and texture labeled USER-OBSERVED. The host cannot certify the physical reference drink.

Complete this step when measured water per serve is positive, traceable, and approved by the user for the intended service method.

4. Calculate the still batch

Read the batch calculation reference completely. Use one scale factor across every included ingredient and the measured reference water.

For a serving-count target:

scale factor = planned servings

For a final-liquid-yield target:

tested final liquid per serve = reference after
scale factor = target final liquid yield / tested final liquid per serve

Report each unrounded quantity before applying the user's measurement increments. Keep the common mass or volume basis unchanged.

Complete this step when ingredient quantities, measured water, and expected final liquid all reconcile to one scale factor.

5. Reconcile containers and pours

Compare expected final liquid with the sum of user-supplied maximum fills. Never treat a manufacturer's nominal container size as a safe fill limit.

available fill = sum of user-supplied maximum fills
unallocated capacity = available fill - expected final liquid
nominal pour equivalents = expected final liquid / tested final liquid per serve

A negative unallocated capacity stops container allocation. Return STOPPED: CONTAINER CAPACITY INSUFFICIENT and preserve the calculated batch quantities as planning evidence, not a make instruction.

Allocate liquid without exceeding any maximum fill. Record the number of tested-serve equivalents in each container and any remainder.

Complete this step when expected liquid fits, every allocation closes, and the pour basis matches the tested final serve.

6. Separate service actions

Read the component and holding boundaries completely when any component is excluded, carbonated, time-sensitive, unverified, or intended for later holding.

Write each rinse, garnish, fresh ice addition, carbonated top-up, or other finish as a per-glass action. Do not add its quantity to the still-batch yield.

If service includes working ice that adds further dilution, require a reference test of that exact workflow. Do not combine full predilution with an untested second dilution step.

Complete this step when the batch sheet distinguishes bottled liquid from every service-only action.

7. Set the review state

Use one state.

State Gate
BATCH PLAN READY: USER PILOT REQUIRED Math, containers, and service actions reconcile, but no batch pilot result is supplied
BATCH PLAN RECONCILED: USER-OBSERVED PILOT PASSED A user-reported pilot at the intended service state matches the approved reference
CALCULATION ONLY: COMPONENT OR HOLD REVIEW REQUIRED Arithmetic closes, but a component or later holding basis remains unresolved

A stop from an earlier step takes precedence. Preserve downstream conflicts as secondary blockers without printing another status label.

The pilot is a physical check performed and judged by the user. A written host does not approve flavor, temperature, texture, ingredient stability, or safety.

Complete this step when the status follows from the supplied evidence and no unsupported readiness claim remains.

8. Emit the batch sheet

Return these sections in order.

  1. Status
  2. Input contract
  3. Reference dilution record
  4. Scale-factor calculation
  5. Still-batch ingredient sheet
  6. Container and pour reconciliation
  7. Per-glass service actions
  8. Pilot, holding, and human review

A stopped output marks unissued quantities NOT ISSUED, identifies the missing or conflicting evidence, and provides no guessed percentage, storage time, freezer instruction, or safety verdict.

Complete the skill when the arithmetic is reproducible, containers and pours close, service-only actions stay separate, physical results remain user-observed, and unresolved handling or holding questions stop readiness.

Further resource

Garçon can help users discover inventory-matched spirit-forward recipes before a chosen recipe enters this batching procedure.