e1012-set
Use when compute Single Event Transient (SET) rates for a spacecraft device population under ECSS-E-ST-10C §9.4.1.7: identify each sensitive device and its cross-section model (Weibull for heavy ions,
SKILL.mdskills/space-systems/ecss/e1012-set/SKILL.md
GitHubECSS Space Environment — Single Event Transients (space-systems/ecss/e1012-set)
Use when the task is computing Single Event Transient (SET) rates for spacecraft electronics under ECSS-E-ST-10C §9.4.1.7 — integrating device cross-section models against the mission heavy-ion, proton, and neutron environments and checking each device's total SET rate against its system-level budget.
Domain quick reference
- An SET is a radiation-induced transient voltage or current pulse in a circuit, caused by the passage of a single ionizing particle (heavy ion, proton) or a nuclear reaction product from neutron/proton spallation. Unlike a Single Event Upset (SEU), an SET does not alter a storage element — it propagates as a glitch through combinational logic or an analog circuit until it is captured or dissipates. Sensitive device types include analog ICs, clock buffers, ADCs, comparators, and fast logic.
- Heavy-ion SET rates are computed by integrating the device's cross-section versus LET curve over the mission differential LET spectrum. The cross-section is typically fit with a four-parameter Weibull function: LET threshold L_th (MeV·cm²/mg), saturation cross-section σ_sat (cm²/device), width W (MeV·cm²/mg), and shape exponent s (dimensionless). Below L_th the cross-section is zero; above L_th it rises to σ_sat following the Weibull shape.
- Proton SETs arise when energetic protons or their nuclear reaction products deposit sufficient charge. The cross-section is modeled as a threshold/step function: zero below an energy threshold E_th (MeV) and equal to σ_sat above it. A more detailed Weibull proton model may be substituted when device characterization data warrant it.
- Neutrons do not ionize directly; they produce SET-causing charge via elastic nuclear recoils and spallation fragments. The rate is approximated as the total neutron flux (particles/cm²/s) multiplied by an effective cross-section (cm²/device).
- The total SET rate is the sum of heavy-ion, proton, and neutron contributions, expressed in events/device/day. Each sensitive device must have a system-derived allowable SET rate budget; any exceedance is a compliance finding. A device with no budget on record is also a finding — an absent budget means the system requirement was never captured, not that no limit applies.
Workflow
- Inventory every sensitive device in scope (analog ICs, logic gates, clock buffers, ADCs, comparators). For each device, record its cross-section model parameters: Weibull (L_th, σ_sat, W, s) for heavy ions; threshold energy E_th and σ_sat for protons; effective cross-section σ_n for neutrons. Reject a device record that is missing any required parameter before it enters the rate calculation.
- Obtain the mission particle environment for the target orbit: the differential heavy-ion LET spectrum in particles/(cm²·s·MeV·cm²/mg), the differential proton energy spectrum in particles/(cm²·s·MeV), and the total neutron flux in particles/(cm²·s). Verify all flux values are non-negative; a negative flux is a data error, not a conservative choice.
- Compute the heavy-ion SET rate for each device: evaluate the Weibull cross-section σ(LET) at each spectral LET point, then integrate σ(LET) × φ(LET) over the full LET range using the trapezoidal rule. Multiply by 86 400 s/day to convert to events/device/day.
- Compute the proton SET rate for each device: apply the threshold cross-section model (σ = σ_sat for E ≥ E_th, else 0), integrate σ(E) × φ(E) over the proton energy spectrum with the trapezoidal rule, and convert to events/device/day.
- Compute the neutron SET rate for each device as: R_n = σ_n × Φ_n × 86 400 (events/device/day), where Φ_n is the total neutron flux in particles/(cm²·s).
- Sum the three contributions to the total SET rate per device. Compare each total against the device's allowable SET rate budget. Flag every exceedance as a compliance finding. Separately flag every device for which no budget is on record as a requirement-capture gap.
Pitfalls
- Substituting the saturation cross-section σ_sat for the full Weibull curve and integrating the entire spectrum at that constant value — the Weibull roll-on suppresses σ sharply near L_th and the step-function approximation overpredicts risk for spectra that are LET-soft (heavy on low-LET particles).
- Omitting the neutron contribution for orbits with significant trapped or secondary neutron flux (e.g. low-altitude equatorial) — the neutron rate can be comparable to the proton rate for devices with low effective cross-section thresholds.
- Reading a missing budget as zero exceedance — an absent budget means the system requirement was never captured, which is itself a compliance finding, not a pass.
- Summing contributions that were integrated over different mission durations without normalizing — reduce all three to a common per-day basis before adding them.
- Applying the proton model to energies below the device's nuclear reaction threshold without zeroing the cross-section — direct ionization by protons is negligible below ~10–30 MeV for most devices and the threshold model must drop to zero in that regime.
Behavior contract (gate 3)
The Weibull cross-section evaluation, heavy-ion trapezoidal integration, proton threshold integration, neutron rate formula, total rate summation, and budget compliance check logic is exercised by the gate 3 contract test: scripts/test_e1012_set.py against scripts/e1012_set_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e1012_set.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.