e1011-eva
Use when design EVA and planetary surface activity requirements for a space system under ECSS-E-ST-10-11C §4.7.10: verify suit interface compatibility (operating pressure, thermal envelope, life suppo
SKILL.mdskills/space-systems/ecss/e1011-eva/SKILL.md
GitHubECSS Human Factors — EVA and Planetary Surface Activity (space-systems/ecss/e1011-eva)
Use when the task is to design EVA and planetary surface activity requirements for a space system under ECSS-E-ST-10-11C §4.7.10 -- specifying suit interfaces, EVA tool requirements, crew mobility envelopes, consumable margins, and abort timelines.
Domain quick reference
- EVA design covers two environments: orbital microgravity (ISS exterior, free-flyer) and planetary surfaces (lunar, Martian). Each environment drives different mobility assumptions: handrail translation speed and microgravity body positioning for orbital; suited walking speed and terrain slope limits for planetary. The surface type is determined before any timeline or force assessment.
- Suit interface parameters govern the physical connection between crew and system: the suit's operating pressure must be validated against the spacecraft cabin pressure to identify whether a pre- breathe protocol is required to mitigate decompression sickness risk. Life support endurance must cover the planned EVA duration plus a 25% reserve. Thermal operating range must bracket the expected environment temperatures at both extremes.
- Tool design requirements constrain force, reach, and grip. Suited crewmembers are limited in the force they can apply (approximately 111 N one-handed, 222 N two-handed in typical EVA suits); any tool requiring a higher operator force fails the EVA design requirement. Reach envelopes and glove compatibility with the tool handle are checked separately and are both gateable.
- Consumable margins apply to O2, electrical power, and thermal control (metabolic heat removal). Each consumable is checked at end-of-EVA against a required reserve fraction (default 25%) of total supply. An EVA timeline that leaves any consumable below its reserve fraction fails the margin check.
- Abort scenario verification confirms that the crew can return to the airlock from the most distant worksite within the safe-return time limit using remaining consumables. The abort translation time is computed from worksite distance and surface-type translation speed; the remaining consumable capacity must cover that return duration.
Workflow
- Determine the surface type (microgravity, ISS exterior, lunar, Martian) for the EVA activity. This sets the translation speed and terrain slope limits used in all subsequent calculations.
- Check suit interface compatibility: confirm that life support endurance covers planned duration with 25% margin; flag if suit operating pressure is at or above cabin pressure (pre-breathe protocol required); confirm environment temperatures fall within the suit's thermal operating range. Reject the suit if any life support or thermal check fails.
- Assess each EVA tool: confirm required operator force does not exceed the suited operator force limit for the operation class (one-hand or two-hand); confirm tool reach meets the task's minimum reach; confirm the handle is compatible with the EVA pressure glove. Flag every failing parameter as a distinct issue.
- Evaluate crew mobility: for planetary surfaces, compare terrain slope against the surface-type trafficability limit; compute estimated translation time from distance and speed; flag if estimated time exceeds the allowed timeline allocation.
- Compute consumable margins at end of planned EVA duration: for each consumable (O2 mass, electrical energy, coolant/thermal capacity), subtract usage from supply and compare the remainder against the required reserve fraction. Flag each consumable that falls short.
- Verify the abort scenario: compute return time from furthest worksite to airlock using the surface-type translation speed; confirm return time is within the abort time limit; confirm consumable remaining at abort trigger covers the return duration.
- Aggregate all findings. The EVA design is compliant only when all suit, tool, mobility, consumable, and abort checks are clear.
Pitfalls
- Applying ISS translation speed to a planetary surface EVA and underestimating return time -- suited walking on lunar or Martian terrain is two to four times slower than handrail translation in microgravity.
- Checking consumable margin against the remaining quantity at the abort trigger instead of at planned end-of-EVA -- the margin check applies to the full planned timeline; the abort check is a separate verification against remaining capacity at abort time.
- Treating a pre-breathe flag as non-critical -- if suit operating pressure is at or above cabin pressure, a pre-breathe protocol is operationally required and must be captured in the EVA design document; omitting it is a design gap, not a warning.
- Checking force against the operator maximum without also checking the class limit -- the suited crewmember's personal force capability may exceed the EVA class limit; both bounds must hold.
- Leaving terrain slope unverified for planetary EVAs because no specific worksite has been selected -- the design requirement must state the maximum slope for which the EVA is designed; if no value is on record, flag the gap rather than assume flat terrain.
Behavior contract (gate 3)
The suit-interface, tool-assessment, mobility-evaluation, consumable-margin, and abort-timeline logic is exercised by the gate 3 contract test: scripts/test_e1011_eva.py against scripts/e1011_eva_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e1011_eva.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.